DOG MATE - Dog Door Medium White - 290 x 350 mm

Product Description
Suitable for Cats and Spaniels, Terriers, Poodles etc. to 460mm (18") shoulder height.

Self lining to 50mm (2”).


  • Self Lining to 2" Thick
    Ideal for all doors & walls
  • Robust Locking Panel
    Provides security & makes it clear to your dog when the door is locked
  • Silent Action
    Will not frighten pets or disturb owner
  • Lightweight Flap
    Allows for easy access & may be used by cats
  • Draft & Weatherproof
    Fully brush sealed flap with magnetic closure
  • Rainproof Seal

Package Description: 290 x 350 mm

Serving Size: ..

Number of Servings: ..

    2-Way Lock
  • Overall Size: W 290mm H 350mm
  • Cut Out Size: W 242mm H 300mm
  • 50mm Self Lining Thickness
  • Suits; Doors, Panels & Walls
  • Suits dogs with shoulder height 460mm (18")
1. Remove locking panel from interior frameby simultaneously depressing the buttonmarked 'PRESS' and lifting up. Place framein required position where it will not beexposed to prevailing winds with tape asin Fig. 1. Note that the bottom of theaperture should be approximately levelwith your dogs stomach. Mark position ofmounting bolt holes and draw around theaperture with a sharp pencil. Removeframe from door.
2. Drill bolt holes with a 1/4" (6mm) diameterdrill taking care to keep the drill square(Fig. 2.) Note that for installation in wallsand doors more than 2" (50mm) thick werecommend that you attach the framesusing suitable screws (not supplied) anddrill holes to suit. 3. Mark a cutting line 3/8" (10mm) outsidethe aperture drawn in Fig. 1 and drill ahole approximately 1/4" (6mm) diameterwithin each corner as in Fig. 3. Cut outalong the cutting line with an electricjigsaw or similar tool taking care to cutsquare to the door.
4. Measure thickness of your door and usinga sharp knife or scissors cut along thenearest guideline on the four door liners todoor thickness PLUS 3/4" (19mm). Do nottrim off the notch(es) on the bottom doorliner (Fig. 4.) Also cut the mounting boltssupplied to your door thickness + 3/4"(19mm) using a hacksaw as in Fig. 4 andfile bolt ends for easy nut threading. Forwalls and doors greater than 2" (50mm)thick we recommend that you cut yourown door liner using suitable 3/32" (2mm)plastic sheet (not supplied).
5. Assemble 4 door liners into the slotsprovided in the exterior frame and tapetemporarily in position as shown in Fig.5. Note that the 'notched' door liner isfitted to the bottom of the frame with thenotch(es) around the frame magnet(s).The door liners should be fitted with theirsmooth face innermost. Push rubber sealsupplied into groove in exterior frame asshown, leaving a drainage gap atbottom centre.6. With the aid of a helper assemble dogdoor in position with tape ensuring thatdoor liners locate properly into interiorframe, then fit nuts and bolts as shown inFig.
6. Do not overtighten the fixing bolts.Check flap swings freely. If it does not,check frames are undistorted and thatinterior frame is aligned with exteriorframe. Finally, cover fixings with theplastic caps supplied and removetemporary fixing tape.
7. For added security the 2 plastic pinsshould be inserted through the holes atthe bottom of the interior frame into thelocking panel.
SAFETY WARNING This door is not designed to prevent the passage of children or small adults in either direction. CLEANING Clean using water only. Detergents and polishes may damage the plastic.


The products sold on this site are not approved to diagnose, treat, cure or prevent disease. Information on this site including any product label or packaging should not be considered as a substitute for advice from a healthcare professional.


This Site is not intended to provide diagnosis, treatment or medical advice. Products, services, information and other content provided on this Site, including information that may be provided on this Site directly or by linking to third-party websites are provided for informational purposes only. Please consult with a physician or other healthcare professional regarding any medical or health related diagnosis or treatment options.


Always check the product label or packaging prior to using any product. If there are discrepancies, customers should follow the information provided on the product label or packaging. You should contact the manufacturer directly for clarification as to product labeling and packaging details and recommended use. Please also consult your physician for a complete list of indications, warnings, precautions, adverse events, clinical results, and other important medical information.

Free Shipping - All Orders Over $25


All Vitamin Grocer orders are shipped from the East Coast of the United States. Vitamin Grocer offers two shipping options with different costs depending upon whether or not your order value is greater than $25. The standard processing time for all orders is 2 business days.

Vitamin Grocer's standard shipping option is DHL eCommerce's International Priority Airmail (IPA) service. DHL transports the package from the Vitamin Grocer warehouse to your local mail carrier who delivers the package to your front door. Orders over $25 ship for FREE using this service. See table below for more details.

In addition, Vitamin Grocer now offers a shipping option with door-to-door tracking for an additional charge. This service is DHL eCommerce's ePacket service. Unlike our standard service, which generally only provides tracking up to the port of entry of the destination country, ePacket provides door-to-door tracking with delivery confirmation. See below for rates and additional details.

In addition to Australia, we also ship to New Zealand, Indonesia, Hong Kong, Japan, Singapore and Taiwan.  Unfortunately, door-to-door tracking is not currently available for deliveries to Indonesia, Japan and Taiwan.






[powr-faq id=763758cf_1506362475]



Vitamin Grocer Australia

Property of Lycka, LLC

2221 Industrial Highway

York, PA 17402